Design and production of a fuel tank measuring system using computer interface

Authors

  • Nnanna, I. OGO Mechanical engineering Dept, Federal University of Technology, Owerri, Nigeria
  • R .C Ononogbo Mechanical engineering Dept, Federal University of Technology, Owerri, Nigeria

Keywords:

Tank, Design, Measuring system, Computer interface

Abstract

This project took into account the processes involved in the design of the fuel tank measuring system using a computer interface. Our level sensor is Capacitance-based and was used to measure through variations in dielectric constant despite the varying fuel viscosity or tank conditions. A detailed design was done and the components carefully selected to ensure that they are compatible with the fuel to be measured. We Equipped it with a digital indicator to display process values and powering of the sensor with a 12volts battery. Capacitance level sensors are rugged and easy to use without any moving parts. They were used in constricted places due to its compact size. At the end of the design and fabrication, the project was confirmed to be effective for use in any underground storage fuel tank.

References

. Alimardani, R.(1987),. A computer based instrumentation system for measuring tractor field performance. PhD Thesis, Iowa state university, Ames, Iowa.

. Bedri, A-R A., & Al-Hashem, H A. S., 2006. High Precision Instrumentation Package for Monitoring the Tractor Performance. Scientific Journal of King Faisal University (Basic and Applied Sciences), 7, 95- 106.

. Hamzeh F, Hossein M, Ali J, Davood M.(2007). Designing and fabricating an instrument for monitoring fuel consumption of an Underground Fuel Tank. Accepted for oral presentation in International Agricultural Engineering Conference. IAEC ref. 520. 3 – 6 December 2007. Bangkok, Thailand.

. Hansson, P.A., Lindgren, M., Nordin, M., and Pettersson., O.,(2003). A methodology for measuring the effects of transient loads on the fuel efficiency of Underground Fuel Tank. Applied Engineering in Agriculture 19(3), 251–257.

. Kheiralla, A.F., Yahya, A., Zohadie M., and Ishak, W., (2007). Modeling of power and energy requirements for tillage implements operating in Serdang sandy clay loam, Malaysia. Soil & Tillage Research 78, 21–34

. Physics initiative. Petrol and octane number. Retrieved September 20, 2012 from http://www.physicsscienceinitiative.html

. David frost. Level measurement. Retrieved September 12, 2012 from http://www.ehow.com/level_measurement.com

. Weick.K and Sutcliffe K (2001); Construction and fabrication of fuel tank.Jossey-Bass, San Francisco 102-115

. Yule, I.J., Kohnen, G., and Nowak, M., (1999). A tractor performance monitor with DGPS capability. Computers and Electronics in Agriculture, 23, 155–174.

Downloads

Published

2024-02-26

How to Cite

Nnanna, I., O. G. O., & R .C, O. (2024). Design and production of a fuel tank measuring system using computer interface. COMPUSOFT: An International Journal of Advanced Computer Technology, 2(09), 275–284. Retrieved from https://ijact.in/index.php/j/article/view/51

Issue

Section

Original Research Article

Similar Articles

<< < 21 22 23 24 25 26 27 28 29 30 > >> 

You may also start an advanced similarity search for this article.