Formation of the quality management system criteria in repurposing industrial facilities

Authors

  • Topchy D PhD., Associate Professor at Federal State Budget Educational Institution of Higher Education “Moscow State University of Civil Engineering”Institute of Construction and Architecture, Department of Technologies and Organizations of Construction Productions, Moscow, Russian Federation

Keywords:

industrial facility repurposing, process control structures, construction supervision, quality management system, computer-aided design system

Abstract

For decades, the principles of urban planning have not paid due regard to the specific features of industrial areas’ location with account of the dynamic development of megalopolises that absorb such facilities and thus create destructive factors for the urban environment. Surrounded by residential, administrative, and office blocks, industrial areas lose their attractiveness to the city authorities in their function as main budget-forming and job-creating entities, as the development of civilization results in new requirements to the environment, increasing the cadastral value of the land, while the cost of labor in the central parts of large cities grows much faster than on the outskirts or in small towns, where the process of “absorption” of industrial areas by the urban environment is not so fast and intensive. The issue of repurposing manufacturing enterprises located in the central parts of cities, as well as quality control in implementing renovation of similar facilities is particularly acute for large cities, whose urbanization areas are continuously growing. This article deals with the study of the links between the process control and management structures, as well as information support for construction supervision in the Russian Federation and other countries, such as the United Kingdom, the United States, Germany, etc.; reveals the main features of the interaction between customers and general contractors in construction quality management; and justifies the need for development of an automated design system for construction quality management.

References

Federal Law of the Russian Federation "Urban Development Code" of December 29, 2004 №190-FZ. 2004. Consultant Plus. Retrieved

from: http://www.consultant.ru/document/cons_doc_LAW_51040/Last Accessed 2019/09/02.

Federal Law of the Russian Federation "On Technical Regulation" of 27.12.2002 № 184-FZ. 2002. Consultant Plus. Retrieved from: http://www.consultant.ru/document/cons_doc_LAW_40241/ Last Accessed 2019/10/08.

Federal Law of the Russian Federation "Technical Regulations on the Safety of Buildings and Structures" dated 30.12.2009 № 384-FZ.

(2009). Consultant Plus. Retrieved from: http://www.consultant.ru/document/cons_doc_LAW_95720/ Last Accessed 2019/09/28.

Lapidus, A. A. 2017. Formation of professional orientation of specialists in the field of construction on the basis of analysis of their employment in various sports. Theory and practice of physical culture. 5, 33-34.

Reiner-Roth, S. 2019. The artful repurposing of industrial wastelands. Retrieved from: https://archinect.com/news/article/150137995/the-artfulrepurposing-of-industrial-wastelands Last Accessed 2019/10/02.

Chan, H. 2019. Adaptive reuse of industrial buildings – 7 brilliant ideas. Retrieved from: https://assetsamerica.com/adaptive-reuseindustrial-buildings/ Last Accessed 2019/10/08.

Adelman, J. 2019. Refinery shutdown could mean new life for 1400 waterfront areas. The Philadelphia Inquirer. Retrieved from: https://www.inquirer.com/news/philadelphia-refinery-complexreal-estate-land-use-port-housing-remediation-20190626.html Last Accessed 2019 0831.

Afanasyev, A.A. 2017. Efficiency of pipe-concrete structures in the construction of frame buildings and structures. Construction and reconstruction. 4, 111-120.

Lapidus, A.A. 2016. Forming the integral potential of organizational and technological solutions through decomposition of the main elements of the construction project. Bulletin of MGSU. 12, 114-123.

Topchiy, D. V. and Tokarskii, A. Ya. 2017. Increase of organizational and technological reliability of the objects of reprofiling in the implementation of construction supervision. Science and Business. 10 (76), 15-19.

Seryh, A. 2010. Technical regulation in construction. Analytical review of world experience. SNIP Press, Chicago. Retrieved from: http://iceg.com.ua/wpcontent/uploads/2016/04/techno_reg_stroi_world.pdf Last Accessed 2019/09/12.

Topchiy, D.V. andSkakalov, V.A. 2017. Structural and functional modeling of multi-level and multi-criteria links of organizational, technological, managerial structures and information support in the implementation of construction control during the conversion of industrial facilities. Prospects of Science. 10 (97), 44-50.

Afanasyev, A. A. 2016. Pipes for construction of frame buildings. Academia. Architecture and construction, 2, 113-118.

Oleinik, P.P. 2016. Conditions for ensuring the comprehensive production of earthworks. Scientific Review. 14, 239-243.

Billington, M.J. 2007. The building regulations: Explained and Illustrated. Blackwell publishing, Oxford.

Billington, M.J. 2005. Using the Building Regulations: Administrative Procedures. Elsevier Press, Amsterdam.

Ministry for the Environment. New Zealand Government.2008. A beginner's guide to resource and building consent processes. Retrieved from: https://www.kaikoura.govt.nz/assets/Docs/Services/BuildingConsent/resource-and-building-consent-processes.pdf Last Accessed 2019/10/08.

Decree of the Government of the Russian Federation of June 21, 2010, No. 468 "On the procedure for conducting construction control in the construction, reconstruction and overhaul of capital construction projects". 2010. Russian Business Newspaper, 760 (27) Retrieved from: https://rg.ru/2010/07/27/kontrol-dok.html) Last Accessed 2019/09/04.

National Association of Builders (NOSTROY).Monitoring of accidents and incidents. Retrieved from: http://nostroy.ru/informationdisclosure/monitoring_proishestviya/ Last Accessed 2019/09/25.

Reizenbuk, K., Sarapulova, T., Shchedrin, S., Shchedrina I. 2019. Application of distributed computing in developing architecture of

intelligent information system for automated stock exchange trading. Journal of Advanced Research in Dynamical and Control Systems. 5,

-49.

Downloads

Published

2024-02-26

How to Cite

Topchy, D. (2024). Formation of the quality management system criteria in repurposing industrial facilities. COMPUSOFT: An International Journal of Advanced Computer Technology, 9(05), 3672–3676. Retrieved from https://ijact.in/index.php/j/article/view/569

Issue

Section

Original Research Article

Similar Articles

<< < 13 14 15 16 17 18 19 20 21 22 > >> 

You may also start an advanced similarity search for this article.