An experimental study on distortional buckling strength of the cold formed steel columns with inward lip
Keywords:
strength, forming, cold working, strength of materialAbstract
The aim of this study is the distortional buckling strength of open thin walled cold formed steel column with inward lip under axially compression with hinged end condition. This study gives a very wide knowledge about the cold formed steel necessity & its requirement in various applications in different fields. It also gives the knowledge about the various modes of failures of cold formed steel members, like local buckling, distortional buckling and flexural - torsional buckling. To study the distortional buckling of the open thin walled section, the section made partially closed by providing spacers which connects the lip of open section at different intervals. Four specimens were fabricated with the uniform thickness of 1.6 mm having a yield stress of 350 Mpa. One control specimen i.e. without spacers and other three specimens with spacers by varying the numbers were tested. The spacers are connected to the column by self-tapping screws.
References
. B.C Punmia “Design of steel structures” (2007) Laxmi Publications (p) ltd.
. Indian Standard code of practice for cold formed steel (IS:801-1975)
. B.W. Schafer &Pekoz local and distortional buckling of cold formed steel
. “R.S Talikoti, K.M. Bajoria” “New approach to improving distortional strength of intermediate length thin walled open section-2005”
. Ben Young and Kim J.R. Rasmussen “Design of lipped channel-1998”
. Godoy, L. A. , E. J. Barbero, and I. Raftoyiannis, Interactive Buckling Analysis of Fiber-Reinforced
. Effects of pump recycling technique on stimulated Brillouin scattering threshold: A theoretical model,” Optics. Express, Vol. 18, No. 21, pp. 22339-22347.
. Particle swarm optimization on threshold exponential gain of stimulated Brillouin scattering in single mode fibers,” Optics. Express, Vol. 19, No. 3, pp. 1842-1853.
. Schafer, B.W. Distortional buckling of cold-formed steel columns. American Iron And steel institute-2000 Brillouin Linewidth Characterization in Single Mode Large Effective Area Fiber through the CoPumped Technique,” International Journal of Electronics, Computer and Communications Technologies (IJECCT), Vol. 1(1), pp. 16-20.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2017 COMPUSOFT: An International Journal of Advanced Computer Technology
This work is licensed under a Creative Commons Attribution 4.0 International License.
©2023. COMPUSOFT: AN INTERNATIONAL OF ADVANCED COMPUTER TECHNOLOGY by COMPUSOFT PUBLICATION is licensed under a Creative Commons Attribution 4.0 International License. Based on a work at COMPUSOFT: AN INTERNATIONAL OF ADVANCED COMPUTER TECHNOLOGY. Permissions beyond the scope of this license may be available at Creative Commons Attribution 4.0 International Public License.